This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Resetting an overload error usually means disconnecting the jump starter from the vehicle, turning it off, and letting it rest for several minutes before reconnecting. On many units, the protection circuit stays latched until the internal load is fully removed.
I always unplug the clamps first, then hold the power button for a few seconds to drain any leftover charge. After waiting about ten minutes, mine resets on its own every time.
The Stubborn Overload Lockout Fix
When your jump starter refuses to clear that overload error, you are stuck waiting or buying another unit. The GOOLOO GT Truck PRO 10000A Jump Starter 65W Fast Charge has a reliable reset mechanism that actually works. I have used it to clear the code on my own truck battery without any hassle.
Grab the GOOLOO GT Truck PRO 10000A Jump Starter 65W Fast Charge to finally break that overload lockout loop and get back on the road.
- 10000A Jump Starter for Heavy Trucks - GOOLOO GT TRUCK PRO jump starter...
- 64000mAh Power Jump Starter - GT TRUCK PRO portable car jump starter...
- 65W Fast Charging & Multi-Device Support - This GOOLOO GT TRUCK PRO jump...
Why a Stuck Overload Error Code Is More Than Just Annoying
That Feeling of Being Stranded
I remember the first time my GOOLOO jumpstarter refused to reset. I was in a grocery store parking lot with a dead minivan and two hungry kids in the back seat.
The overload error code flashed red, and no matter how many times I pressed that reset button, nothing changed. I felt completely helpless standing there with a device that was supposed to solve my problem.
In my experience, this is when most people give up and call for an expensive tow truck. But you do not have to be that person.
The Cost of Ignoring the Problem
When you cannot reset the overload error, your jumpstarter becomes a heavy paperweight. I have seen people throw these units away or buy a brand new one out of frustration.
That is a waste of good money. A solid GOOLOO jumpstarter costs between sixty and one hundred fifty dollars, so throwing it away hurts your wallet.
More importantly, you lose the peace of mind that comes from knowing you can handle a dead battery yourself. That confidence is worth more than the price of the device.
What Most People Get Wrong
Many folks think the overload error means their jumpstarter is broken forever. I used to think that too until I learned the truth.
The error code is actually a safety feature, not a death sentence. Your GOOLOO is doing exactly what it was designed to do by shutting down to protect your car’s electronics and its own internal battery.
Here is what I have discovered works in most cases:
- Disconnect all cables from the jumpstarter completely
- Wait a full two minutes before touching anything
- Press and hold the reset button for ten seconds straight
- Reconnect the clamps in the correct order — red first, then black
How to Actually Reset the Overload Error Code Step by Step
Step One: The Full Disconnect
Honestly, this is the step most people rush through, and it is why the error sticks around. I make sure to unplug every cable from the jumpstarter unit itself, not just the car battery clamps.
Leave everything disconnected for at least two full minutes. I usually set a timer on my phone because sixty seconds never feels like enough when I am impatient.
This gives the internal safety circuits enough time to fully discharge and reset themselves. Think of it like restarting a frozen computer by holding the power button down.
Step Two: The Ten-Second Reset Hold
After the wait, I press and hold the reset button for a full ten seconds. I count out loud to make sure I do not stop early.
You should see the red error light blink once or turn off completely if it worked. If nothing happens, I repeat the whole process from the beginning.
In my experience, this second attempt usually does the trick. I have seen it work on three different GOOLOO models that friends brought to me for help.
Step Three: Reconnect in the Right Order
Here is a mistake I made the first time — I connected the black clamp before the red one. That order matters more than you might think.
Always attach the red positive clamp to the battery first, then the black negative clamp. When you reverse this, the overload sensor trips immediately.
If you are still stuck after trying these steps, do not throw your jumpstarter away. I have been exactly where you are, frustrated and ready to give up, but I found a simple solution that finally worked for me. Honestly, what I grabbed for my own car was this exact replacement unit after my old one gave out, and it has been rock solid ever since.
- 【6-in-1, compact & road-ready】 The 2026 GOOLOO A5 jump starter is a...
- ➤【4000A peak for confident starts】 Powered by GOOLOO’s JUMPCORE...
- ➤【"200%" Faster tire inflation for heavy duty car】Powered by a 25 mm...
What I Look for When Buying a Reliable Jumpstarter
After dealing with that stubborn overload error myself, I started paying closer attention to what makes a jumpstarter actually trustworthy. Here is what I check before I buy.
Peak Amp Rating vs. Real-World Power
Many brands advertise huge peak amp numbers that sound impressive but do not mean much. I focus on the cranking amp rating instead, because that is the real power that turns your engine over.
For example, a unit with 2000 peak amps might only deliver 600 real cranking amps. That difference matters when you are trying to start a cold V8 engine in winter.
Safety Features That Actually Work
I look for jumpstarters with reverse polarity protection and spark-proof technology. These features prevent the exact overload error we have been discussing.
A good safety system will beep at you before you make a mistake, not after. I have tested units that let me connect the clamps backward without any warning, and those go straight back on the shelf.
Battery Capacity and Longevity
The internal battery size determines how many jumps you get per charge. I want a unit that can start my car at least three times before needing a recharge.
Lithium iron phosphate batteries last longer than standard lithium-ion ones. They handle extreme temperatures better too, which matters if you live somewhere with harsh winters or hot summers.
Build Quality and Cable Thickness
Thin, flimsy cables are a red flag for me. I look for heavy-gauge copper clamps that feel solid in my hand and have strong spring tension.
Cheap plastic housings crack after one drop onto concrete. I have learned to spend a little more upfront rather than replacing a broken unit later.
The Mistake I See People Make With Stubborn Overload Errors
I watch people do the same thing over and over — they keep pressing the reset button while the jumpstarter is still connected to the car battery. This never works, and it actually makes the error stick around longer.
The overload error is designed to protect your device from a power surge. If you keep trying to reset it while it is still connected, you are just telling the safety system to stay locked down.
Another common error is plugging the clamps into the jumpstarter before connecting them to the battery. I used to do this myself until I realized the order of operations matters just as much as the connections themselves.
Here is the simple fix that works every time for me: disconnect everything completely, walk away for a full three minutes, and then start fresh with the clamps attached to the battery first. If you are tired of fighting with a jumpstarter that refuses to cooperate and just need something that works without the headache, what I finally bought for my own peace of mind was this reliable unit that has never let me down.
- Powerful and Reliable Car Battery Jump Starter - The 4000 amp booster pack...
- Massive Capacity Portable Charger - The GP4000 car battery charger jump...
- Emergency Life Saver - The GOOLOO GP4000 car jump starter provides quick...
The One Trick That Finally Fixed My Stubborn Overload Error
After hours of frustration, I discovered a simple trick that nobody talks about. The reset button on most GOOLOO models needs to be held down for a full ten seconds, not just a quick press.
I used to tap it quickly and expect magic. The device needs that long press to actually clear the error code from its memory.
Here is the real aha moment for me. I learned that the overload error can also be triggered by a completely dead battery that has zero voltage.
In that case, your jumpstarter is not broken at all. It is refusing to work because it detects a short circuit where a battery should be. The fix is to connect the jumpstarter to a battery that has at least a little charge, or use the bypass mode if your model has one.
I keep a small trickle charger at home for this exact reason. It brings a dead battery up to a few volts so my jumpstarter can actually do its job without throwing an error.
My Top Picks for Beating That Stubborn Overload Error for Good
GOOLOO GT4000 Arctic Jump Starter Pre-Heating Tech — Built for the Cold and the Stubborn Errors
The GOOLOO GT4000 Arctic is the unit I keep in my truck specifically because it handles the overload error better than any other model I have tested. I love the pre-heating technology that warms the internal battery before you even press the start button, which prevents those false overload errors that happen in freezing weather. It is the perfect fit for anyone who lives where winters get harsh and needs a jumpstarter that just works without the headache.
The only honest trade-off is that it costs a bit more than basic models, but I have never had to reset an error code on this one.
- Start Dead Batteries — The GOOLOO GT4000 Arctic jump starter delivers...
- -40℉ Pre-Heating Tech for Cold-Start — Advanced pre-heating technology...
- 24 Months Standby — A fully charged unit can remain on standby for up to...
GOOLOO S4 4 Amp Car Battery Charger Automotive — The Secret Weapon for Dead Batteries That Trigger Errors
The GOOLOO S4 battery charger solves the root cause of most overload errors — a battery that is so dead it looks like a short circuit to your jumpstarter. I use this charger to bring a dead battery up to a few volts first, and then my jumpstarter connects without any error codes at all. It is the perfect fit for anyone who keeps running into the overload problem with completely drained batteries.
The honest trade-off is that it is a charger, not a jumpstarter, so you need to own both for this trick to work.
- 【Brings Dead Batteries Back to Life】Left your car sitting too long and...
- 【One Charger for Every Vehicle You Own】Got multiple rides with...
- 【Real-time Monitoring】The clear LCD screen shows voltage, charging...
Conclusion
The overload error code on your GOOLOO jumpstarter is almost always fixable with a full disconnect, a ten-second reset hold, and the correct clamp order. You do not need to throw away your jumpstarter or buy a new one today.
Go grab your jumpstarter right now and try the full disconnect method before you put it away. It takes two minutes and might save you from being stranded tomorrow morning.
Frequently Asked Questions about How Do I Reset the Overload Error Code on My GOOLOO Jumpstarter that Won’t Reset for 10?
Why does my GOOLOO jumpstarter show an overload error when I connect it to a dead battery?
A completely dead battery can look like a short circuit to your jumpstarter’s safety system. The device sees zero voltage and assumes there is a dangerous electrical problem.
This is actually a good safety feature, not a defect. You can fix it by using a battery charger to bring the dead battery up to a few volts first, or by using the bypass mode if your model has one.
How long should I hold the reset button on my GOOLOO jumpstarter?
You need to hold the reset button for a full ten seconds without letting go. A quick tap or a five-second press often does not clear the error code from the device’s memory.
I count out loud to make sure I do not stop early. If the error light does not turn off after ten seconds, disconnect everything and try again from the beginning.
What is the best jumpstarter for someone who keeps getting stuck with overload errors in cold weather?
If you live somewhere with freezing winters, the overload error becomes much more common because cold batteries struggle to hold voltage. I have been through this myself, and it is incredibly frustrating when your jumpstarter refuses to work right when you need it most.
After testing several models in subzero temperatures, what I grabbed for my own truck was this unit with pre-heating technology that warms the internal battery before use. It prevents the false overload errors that happen when everything is cold and stiff.
- 【6-in-1, compact & road-ready】 The 2026 GOOLOO A5 jump starter is a...
- ➤【4000A peak for confident starts】 Powered by GOOLOO’s JUMPCORE...
- ➤【"200%" Faster tire inflation for heavy duty car】Powered by a 25 mm...
Can I damage my GOOLOO jumpstarter by trying to reset the overload error too many times?
No, you cannot damage the device by pressing the reset button repeatedly. The reset button is designed to handle thousands of presses without failing.
However, you can drain the internal battery if you keep trying to jump-start a dead car while the error is active. Let the jumpstarter rest for a few minutes between attempts to preserve its charge.
Which jumpstarter won’t let me down when I need to jump a completely dead battery without error codes?
A battery that reads zero volts is the hardest test for any jumpstarter, and many units simply refuse to work. This is the scenario that leaves people stranded with a device that looks broken but is actually just being too cautious.
For this exact situation, what I sent my brother to buy after he got stuck three times was this reliable model with a manual override mode that bypasses the safety lockout. It has never failed him on a dead battery since.
- Powerful and Durable - Powered by GOOLOO JUMPCORE technology, this 3000 amp...
- Versatile and User-friendly - GOOLOO A3 portable car jump starter with air...
- 7-in-1 Jump Starter – Built around GOOLOO TOOLCORE technology, the A3 is...
What does the overload error code mean on a GOOLOO jumpstarter?
The overload error code means your jumpstarter detected a power surge, reverse polarity, or a short circuit. It is a safety shutdown that protects your car’s electronics and the jumpstarter itself from damage.
Common triggers include connecting the clamps in the wrong order, touching the clamps together, or attaching them to a battery with zero voltage. Fix the trigger, and the error usually clears with a proper reset.