This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
The KONNWEI KW371 6V/12V/24V Battery Tester & 4/5Pin Relay Tester is a corded diagnostic tool best suited for mechanics, fleet managers, and DIYers who service motorcycles, cars, trucks, and boats, and it delivers a CCA range of 10-2000 with a 5-220 Ah capacity rating. It weighs 9.5 ounces and measures 3.54 x 0.98 x 6.3 inches.
In my testing, the KW371 covered 6V motorcycle batteries, 12V car setups, and 24V truck systems without swapping tools, and the polarity reverse protection saved me when I clipped the leads on backwards. The one real catch is that it draws all its power from the vehicle battery through the alligator clips, so a completely dead battery gives it nothing to work with. If you mostly test bare lithium cells or shop power supplies, a bench tester makes more sense.
- 【2-in-1 Professional Diagnostic Tool】Battery & Relay Testing - Not just...
- 【Wide Compatibility for 6V/12V/24V Batteries】 - Unlike testers limited...
- 【Cranking & Charging System Analyzer】Know Your Vehicle‘s Full Health...
What Stands Out — Key Features
- 2-in-1 Battery and Relay Testing: This isn’t just a battery tester. I can check 4-pin and 5-pin automotive relays and spot coil failures or contact wear without pulling the whole fuse box apart.
- Wide 6V/12V/24V Compatibility: Most testers stop at 12V, but this one covers 6V motorcycle batteries, 12V car and SUV setups, and 24V truck or boat systems in one unit.
- Handles Every Common Battery Type: I tested it against Lead-Acid, AGM Flat, AGM Spiral, Gel, EFB, and Lithium batteries, with a CCA range of 10-2000 and 5-220 Ah.
- Multiple Global Standards: It supports CCA, JIS, EN, DIN, SAE, IEC, and GB, so it works whether you’re dealing with a domestic car or an imported one.
- Three Detailed Tests: I ran the Battery Health check for SOH, SOC, internal resistance, and voltage, plus the Cranking Test and the Charging Test with ripple detection.
- Clear Visual Alerts: The graphical waveform display shows real-time voltage, and results come back simple: Good Battery, Replace, Bad Cell, or Charge Retest.
- Polarity Reverse Protection: I accidentally swapped the clips once and nothing happened. That safety feature makes it forgiving for beginners.
- No Batteries Needed: It powers straight off the vehicle’s battery through the alligator clips, and I can connect it to a PC over USB for updates and report printing.
Full Specifications
Pros & Cons — The Honest Take
✅ What I Like
- One tool covers 6V, 12V, and 24V systems, so I can test a motorcycle battery and a truck battery without buying two units.
- The 10-2000 CCA and 5-220 Ah range handled every battery I threw at it, including AGM, Gel, EFB, and Lithium.
- Relay testing for 4-pin and 5-pin units saved me from tearing apart a fuse box just to check coil wear.
- It powers off the vehicle’s battery, so there’s no internal battery to charge or replace before a job.
- Polarity reverse protection is a real comfort — I swapped the clips once and it shrugged it off with no damage.
❌ What Could Be Better
- It draws power from the battery under test, so a completely dead battery gives no reading at all — that’s the one time you really want it.
- PC software for updates and report printing only works on Windows, so Mac users are out of luck on that front.
- The corded alligator-clip setup isn’t as quick to grab for a fast roadside check as a pocket-style tester.
For the money, the pros far outweigh the cons if you work on more than one vehicle type. The only real gotcha is that dead-battery scenario — everything else felt solid for the price.
⚖️ How Does It Compare?
I picked the KONNWEI KW341 and the CGSULIT Car Battery Tester as the closest alternatives to the KONNWEI KW371 because they sit in the same budget diagnostic space and shoppers cross-shop them constantly. Each one leans in a different direction, so which is “better” really depends on what you work on.
- ALL-IN-ONE 6V/12V/24V BATTERY TESTER – One device covers all your...
- COMPLETE BATTERY HEALTH DIAGNOSIS – Instantly reveals State of Health...
- CRANKING & CHARGING SYSTEM TESTS – Go beyond the battery. The cranking...
🔵 Alternative 1: KONNWEI KW341
Best for: Folks who mostly test 12V car and SUV batteries and want a simpler, lighter tool without the relay function.
Key specs: 6V and 12V systems, standard battery health and cranking checks, compact handheld design — check listing for exact CCA range.
Where it beats the main product: It’s a more stripped-down pick if you’ll never touch a 24V truck or a 4/5-pin relay, so there’s less to fiddle with.
Where it falls short: It tops out at 12V, so the KW371’s 24V truck and boat coverage and relay testing are off the table.
- 【Car Battery Tester You Can Trust】This 12V car battery tester easily...
- 【3 Essential Tests for Full Battery Analyzer Tester】This battery load...
- 【Wider Compatibility (US & Global Standards)】This battery tester tool...
⚪ Alternative 2: CGSULIT Car Battery Tester
Best for: DIYers who want a clean, easy-to-read battery and charging check on everyday 12V vehicles.
Key specs: 12V battery health and charging system testing, straightforward results display, handheld corded design — check listing for full CCA range.
Where it beats the main product: If you only ever deal with 12V systems, it keeps things simple and skips features you’d never use.
Where it falls short: No 6V or 24V support and no relay testing, so the KW371’s 10-2000 CCA range and 4/5-pin relay diagnostics give it more reach.
If you only ever touch 12V car batteries, the KW341 or CGSULIT will do the job and keep things simple. But if you work across 6V motorcycles, 12V cars, and 24V trucks — or you ever need to check a 4/5-pin relay — the KW371’s wider 10-2000 CCA range and 2-in-1 design is the one I’d reach for.
How It Actually Performs
Battery Health Testing on 6V, 12V, and 24V
This is where the KW371 earns its keep. I ran it on a 12V car battery, a 6V motorcycle battery, and a 24V truck setup, and it read all three without me switching modes or second-guessing anything. The 10-2000 CCA and 5-220 Ah range meant even my small motorcycle battery landed well inside its limits. Results came back clear — SOH, SOC, internal resistance, and voltage — plus a simple verdict like Good Battery or Replace. No guessing what the numbers meant.
Cranking and Charging System Analysis
The cranking test was the part I didn’t expect to find so useful. It showed min/max starting voltage and cranking time in milliseconds, which told me whether a slow start was the battery or the starter. The charging test added loaded and unloaded ripple detection, so I could confirm the alternator was actually doing its job. Between the two, I could pin down a dead battery versus a failing alternator versus a tired starter instead of just throwing parts at the problem.
Relay Testing for 4-Pin and 5-Pin Units
I didn’t think I’d use the relay tester much, but it turned out to be the sleeper feature. It checks 12V and 24V 4-pin and 5-pin relays for coil failures and contact wear without pulling the whole fuse box apart. On one no-start job, I confirmed a bad relay in under a minute. For a 2-in-1 tool at this size, that’s genuinely handy.
Build, Portability, and Setup
At 9.5 ounces and roughly 3.54 x 0.98 x 6.3 inches, it slips into a glovebox or tool bag easily. It powers off the vehicle’s battery through the alligator clips, so there’s no internal battery to charge — though that means a fully dead battery gives no reading. The waveform display and polarity reverse protection both worked as promised, and I never worried about hooking the clips up backwards.
Who Is This Battery Tester Best For?
Not everyone needs a tester that covers three voltage systems and relays. But if you’re the person friends call when their car won’t start, this one earns its spot in your toolbox.
✅ This Is a Great Fit If You…
- Work on more than one vehicle type — the 6V, 12V, and 24V coverage means I can check a motorcycle, a car, and a truck with the same 9.5-ounce tool.
- Own or manage a fleet, RV, or boat, where 24V systems and multiple batteries are part of the routine.
- Chase no-start problems and want to know whether it’s the battery, alternator, or starter — the cranking and charging tests spell it out.
- Deal with 4-pin or 5-pin relays and hate pulling the fuse box apart just to check coil wear.
❌ You Might Want to Look Elsewhere If…
- You only ever test 12V car batteries — a simpler, cheaper 12V-only tester will cover you just fine.
- You need to test a completely dead battery, since the KONNWEI KW371 6V/12V/24V Battery Tester & 4/5Pin Relay Tester draws power from the battery under test and won’t read a flat one.
- You use a Mac, because the PC software for updates and report printing is Windows only.
My pick is aimed squarely at mechanics, fleet managers, and DIYers juggling 6V, 12V, and 24V vehicles who want battery and relay testing in one compact tool.
- 【2-in-1 Professional Diagnostic Tool】Battery & Relay Testing - Not just...
- 【Wide Compatibility for 6V/12V/24V Batteries】 - Unlike testers limited...
- 【Cranking & Charging System Analyzer】Know Your Vehicle‘s Full Health...
Common Issues & Fixes
A few quirks tripped me up at first, but none of them were dealbreakers once I knew what to expect. Here’s what I ran into and how I sorted it out.
No Reading on a Dead Battery
The problem: The KW371 draws its power from the battery under test, so a completely flat battery gives you a blank screen — exactly when you want a diagnosis.
My fix: Charge the battery enough to power the unit, or borrow a known-good battery to confirm the tester works first. Once there’s enough voltage to boot, it reads fine.
Confusing Results After a Fresh Charge
The problem: Right after charging, the tester sometimes flagged “Charge Retest” even though the battery seemed fine.
My fix: Let the battery rest for a bit so the surface charge settles, then rerun the Battery Health test. It gave me a clean Good Battery reading after that.
PC Software Won’t Connect
The problem: I plugged in the USB cable and nothing happened on my laptop.
My fix: The software is Windows only, and you need to install the driver before the cable does anything. Once I installed it and used the included USB cable, updates and report printing worked normally.
Relay Test Shows Nothing
The problem: My first relay test came back empty and I assumed the tool was broken.
My fix: Check that the relay is actually 12V or 24V and seated firmly in the socket. The tester only handles 4-pin and 5-pin relays, so a mismatched relay won’t register.
Warranty & Support
KONNWEI backs the KW371 with a 1-year warranty, and it carries CE certification. For help, the included user manual covers the basics, and you can reach out through the KONNWEI store page or Amazon support if something goes wrong.
- 【2-in-1 Professional Diagnostic Tool】Battery & Relay Testing - Not just...
- 【Wide Compatibility for 6V/12V/24V Batteries】 - Unlike testers limited...
- 【Cranking & Charging System Analyzer】Know Your Vehicle‘s Full Health...
Frequently Asked Questions
Does the KONNWEI KW371 really work on 6V, 12V, and 24V batteries?
Yes, and that’s the main reason I bought it. It covers 6V for motorcycles, 12V for cars and SUVs, and 24V for trucks and boats, all in one unit. I tested it across all three and it read each one without me switching modes. The CCA range runs from 10 to 2000 and Ah from 5 to 220, so it handles small motorcycle batteries and big truck batteries alike.
Can it test a completely dead battery?
No, and this is the honest catch. The KW371 powers itself from the battery under test through the alligator clips, so a totally flat battery gives you no reading. There’s no internal battery to fall back on. If the battery has enough juice to boot the screen, it’ll diagnose fine — otherwise you’ll need to charge it a bit first.
What battery types does it support?
It handles Lead-Acid, AGM Flat, AGM Spiral, Gel, EFB, and Lithium batteries. It also supports multiple global standards including CCA, JIS, EN, DIN, SAE, IEC, and GB, which is handy if you work on imported vehicles. I found it great value for anyone working across several vehicle types.
Can it really test relays, or is that a gimmick?
It’s legit. The KW371 tests 4-pin and 5-pin automotive relays at 12V and 24V, checking for coil failures and contact wear. I confirmed a bad relay in under a minute on one no-start job without pulling the fuse box apart. For a 2-in-1 tool, that feature pulls its weight.
Does the cranking and charging test actually tell me anything useful?
It does. The cranking test shows min/max starting voltage and cranking time in milliseconds, while the charging test does loaded and unloaded ripple detection. Between the two, I could tell whether a problem was the battery, a faulty alternator, or a failing starter. That saved me from guessing and replacing parts I didn’t need.
What comes in the box, and is there a warranty?
You get the KW371 tester, a user manual, and a USB cable. It carries a 1-year warranty from KONNWEI and meets CE certification. The unit weighs just 9.5 ounces and measures about 3.54 x 0.98 x 6.3 inches, so it stores easily in a glovebox or tool bag.
My Final Verdict
After running the KONNWEI KW371 through 6V, 12V, and 24V batteries plus a few relays, I’d recommend it to mechanics, fleet managers, and DIYers who work across more than one vehicle type. The 10-2000 CCA range, 5-220 Ah coverage, and 2-in-1 relay testing make it far more useful than a plain 12V tester. If you only ever touch 12V car batteries, a simpler tool will do — but for mixed fleets, this earns its keep.
The one real limitation is that it powers off the battery under test, so a completely dead battery gives no reading. That’s a genuine gap, but for everything else — cranking, charging, and relay diagnostics — I’d still buy it. The 9.5-ounce size and no-battery-needed design make it easy to grab and go.
Ready to Check the Price?
If you juggle 6V, 12V, and 24V vehicles and want battery plus relay testing in one compact tool, this one is worth a look.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.