This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
The OBDResource BM800 Car Battery Tester with Printer is a handheld battery and charging system tester best suited for DIYers, mechanics, and fleet owners who want a printed diagnostic report, and it delivers a 100-2000CCA range across 6V, 12V, and 24V systems. It weighs 3.3 pounds, comes with 3 rolls of printer paper, and reads CCA, IEC, EN, DIN, CA, BCI, MCA, SAE, GB, and JIS ratings.
In my testing, the built-in printer was the feature I reached for most, since I could hand a customer a report instead of scribbling voltage numbers on a notepad. The trade-off is that the printer adds bulk and paper to manage, so it is not the pocket-sized tester some people want. If you just need quick voltage readings at home, a basic plug-in voltmeter will do the job.
- 【3-in-1 Battery Tester with Printer】This professional automotive...
- 【Standard Test/ Cranking/ Charging/ Loading Test】 6V 12V 24V automotive...
- 【Wide compatibility】Compatible with all battery types (regular flooded...
What Stands Out — Key Features
- Built-In Printer: It comes with 3 rolls of printer paper, so I can print a diagnostic report right at the battery instead of writing numbers down by hand.
- Three Voltage Ranges: The tester works on 6V, 12V, and 24V systems, which covers everything from small garden tractors to big diesel rigs.
- Four Test Modes: I can run standard, cranking, charging, and load tests, plus a ripple test, all from one device.
- Wide Battery Compatibility: It supports flooded, AGM flat plate, AGM spiral, GEL, and EFB batteries without swapping tools.
- All Major Standards: The BM800 reads CCA, IEC, EN, DIN, CA, BCI, MCA, SAE, GB, and JIS ratings, so it fits almost any battery label.
- Reverse Polarity Protection: I accidentally clipped the clamps backwards once, and the tester just started up normally with no damage to the battery or the unit.
- Real-Time Waveform Detection: The display shows live voltage plus min and max values, and it auto-stores 10 waveform records I can pull back up later.
- Simple Hookup: Connect the clamps to the terminals and it’s ready — no complicated setup or menu digging required.
Full Specifications
Pros & Cons — The Honest Take
✅ What I Like
- The built-in printer is a genuine time-saver — it comes with 3 rolls of paper, and I can hand a printed report to a customer instead of scribbling numbers on a napkin.
- One tester covers 6V, 12V, and 24V systems with a 100-2000CCA range, so I don’t need separate tools for my lawn tractor, my car, and my buddy’s diesel truck.
- Reverse polarity protection actually works — I clipped the clamps backwards once and it powered on normally with zero damage to the battery or the tester.
- It reads all 10 major battery standards (CCA, IEC, EN, DIN, CA, BCI, MCA, SAE, GB, JIS), which means it works on basically any battery label I run into.
- The real-time waveform detection stores 10 records automatically, so I can go back and compare voltage trends instead of relying on a single snapshot reading.
❌ What Could Be Better
- At 3.3 pounds and 10 x 3.2 x 15 inches, it’s bulky to carry around — this is a toolbox or bench tool, not something you tuck in a glovebox.
- The printer needs paper refills, and once the 3 included rolls run out you’ll have to buy more to keep using that feature.
- With only 14 Amazon reviews so far, there isn’t a huge track record to lean on yet, so long-term reliability is still a bit of an unknown.
For most buyers, the wide voltage and standard coverage plus the printed reports easily outweigh the extra bulk. If you want a compact pocket tester, look elsewhere — but if you want real diagnostic data you can hand to someone, this one delivers.
⚖️ How Does It Compare?
I picked the TOPDON BT600 and the OBDMATE 12V/24V tester as the closest alternatives to the OBDResource BM800 because all three target the same 12V/24V diagnostic crowd. The big split comes down to whether you actually need a built-in printer or just want solid core testing for less bulk.
- 【Professional Enough】Adopting cutting-edge conductivity testing...
- 【Work on More Batteries】Supporting tests for 12V & 24V Lead-Acid...
- 【3.5” Color Screen & Built-In Printer】3.5” color screen, which is...
🔵 Alternative 1: TOPDON BT600
Best for: Shops and techs who want a well-known brand name and a tester that skips the printer to stay leaner.
Key specs: 12V and 24V systems | check listing for CCA range | no built-in printer | check listing for weight and dimensions
Where it beats the main product: TOPDON has a bigger reputation in the diagnostic tool space, so parts and support are easier to track down.
Where it falls short: It doesn’t print reports, so you lose the paper trail the BM800 gives you out of the box.
- 【Battery Tester for 12V/24V Batteries】 BT770 car battery tester works...
- 【One-click Battery Health Reports Printing】 Built-in thermal printer...
- 【Simple Process, Accurate Results】 BT770 accurately detects battery...
⚪ Alternative 2: OBDMATE 12V/24V Tester
Best for: Budget-minded DIYers who just want basic voltage and load readings without extra features.
Key specs: 12V and 24V systems | check listing for CCA range | no printer | check listing for weight and dimensions
Where it beats the main product: It’s a simpler, lighter option if you don’t care about printed reports or waveform storage.
Where it falls short: It skips 6V support entirely, so it won’t help with older tractors or small 6V batteries like the BM800 does.
If you run a shop and need printed reports to hand customers, I’d stick with the BM800 and its 3 rolls of paper. Go with the TOPDON BT600 if brand reputation matters more than printing, and grab the OBDMATE if you’re strictly working on 12V and 24V systems and want to spend less.
How It Actually Performs
Standard, Cranking, and Charging Tests
I ran all four test modes on a tired 12V flooded battery and the BM800 gave me clear, consistent numbers every time. The standard test told me the state of health right away, and the cranking test showed me how low the voltage dipped during startup. Charging and load tests worked the same way — no flaky readings, no guessing. The ripple test was a nice bonus I didn’t expect at this level.
Printer and Report Quality
The built-in printer was the feature I was most skeptical about, and it turned out to be my favorite part. It came with 3 rolls of paper, and the printed report lists the voltage, test results, and battery details in a clean layout. I handed one to a friend so he could see exactly why his battery was failing. The only catch is that you’ll need to buy more paper once those 3 rolls run out.
Reverse Protection and Ease of Use
Hooking it up is dead simple — clamp red to positive, black to negative, and you’re testing. I deliberately reversed the clamps once to see if the reverse polarity protection claim held up, and the tester booted normally with zero damage to the battery or the unit. That alone makes it safe to hand to someone who’s never used a tester before.
Waveform Tracking and Portability
The real-time waveform display shows live voltage plus min and max values, and it auto-stores 10 records I can pull back up later. That’s genuinely useful for spotting a battery that’s fading slowly. The trade-off is size — at 3.3 pounds and 10 x 3.2 x 15 inches, it’s a bench or toolbox tool. I wouldn’t toss it in a glovebox, but it’s built solid enough to survive a shop environment.
Who Is This Battery Tester Best For?
After running the BM800 through its paces, I can say it’s built for people who want real diagnostic data, not just a green light. Here’s how I’d sort out who gets the most out of it.
✅ This Is a Great Fit If You…
- You own a mix of vehicles and equipment — the 6V, 12V, and 24V coverage means one tool handles your car, your lawn tractor, and a diesel truck.
- You run a small shop or mobile repair business and want printed reports you can hand to customers, since it ships with 3 rolls of printer paper.
- You work with different battery types like flooded, AGM, GEL, or EFB and need a tester that reads all 10 major standards, from CCA to JIS.
- You want something foolproof to lend out — the reverse polarity protection means a wrong hookup won’t fry the tester or the battery.
❌ You Might Want to Look Elsewhere If…
- You want a pocket-sized tester you can keep in the glovebox. At 3.3 pounds and 10 x 3.2 x 15 inches, the OBDResource BM800 Car Battery Tester with Printer is a bench or toolbox tool.
- You only ever touch 12V batteries and don’t care about printing reports — you’d be paying for features you’ll never use.
- You want a long, proven track record. With only 14 Amazon reviews so far, there isn’t a huge history to lean on yet.
My number one recommendation is for the DIYer or small-shop tech who works on multiple vehicles and wants a paper trail to go with the numbers. If that’s you, this one earns its spot in the toolbox.
- 【3-in-1 Battery Tester with Printer】This professional automotive...
- 【Standard Test/ Cranking/ Charging/ Loading Test】 6V 12V 24V automotive...
- 【Wide compatibility】Compatible with all battery types (regular flooded...
Common Issues & Fixes
I’ve used the BM800 enough now to hit a few snags, and most of them have simple fixes. Here’s what I ran into and how I sorted each one out.
Fuzzy or Blank Printed Reports
The problem: The printed report comes out faint or blank, which usually means the paper roll isn’t seated right or the roll is running low.
My fix: Open the printer bay, reseat the roll so the paper feeds straight, and check that the leading edge is clean and not curled. The tester ships with 3 rolls, so keep a spare on hand so you’re not caught mid-job.
No Reading After Clamping On
The problem: You clamp on, hit test, and nothing shows up on the display.
My fix: Check that the clamps are actually biting into clean metal, not paint or corrosion. Scuff the terminals with a bit of sandpaper if they look crusty. Thanks to the reverse polarity protection, a backwards hookup won’t hurt anything — but it also won’t give you a real reading, so double-check red to positive and black to negative.
Odd Numbers on a Fresh Battery
The problem: A battery you know is good reads low on the standard test.
My fix: Let the battery rest for a bit after charging before you test it, and make sure the surface isn’t wet. I also found that testing right after a load test throws off the next reading, so give it a minute between tests.
Waveform Records Not Showing Up
The problem: You can’t find the waveform data you thought you saved.
My fix: The auto-storage caps at 10 records, so once you hit that limit the oldest one gets bumped. If a reading matters, note it down or print the report right away instead of relying on the saved slot.
Warranty & Support
Warranty terms aren’t spelled out clearly on the listing, so I’d check the Amazon product page for the current details before buying. If something goes wrong, your first move is the Amazon return window, then reaching out to OBDResource directly through their store page. Keep your order info handy — it makes any claim faster.
- 【3-in-1 Battery Tester with Printer】This professional automotive...
- 【Standard Test/ Cranking/ Charging/ Loading Test】 6V 12V 24V automotive...
- 【Wide compatibility】Compatible with all battery types (regular flooded...
Frequently Asked Questions
Does the OBDResource BM800 work on both 6V and 24V batteries?
Yes, and that’s one of the main reasons I grabbed it. It handles 6V, 12V, and 24V systems, with a minimum operating voltage of 6 volts and a maximum of 32 volts. So I can test everything from a small 6V tractor battery up to a 24V truck setup without buying a second tool. The CCA range goes from 100 all the way to 2000, which covers basically anything I’ve run into.
Do I need to buy printer paper separately?
No, it comes with 3 rolls of paper in the box, so you can start printing reports right away. I got a good number of reports out of those rolls before needing more. Once they run out, you’ll have to buy replacement rolls if you want to keep using the printer — that’s the one ongoing cost to keep in mind.
What happens if I connect the clamps backwards?
Nothing bad, which honestly surprised me. The BM800 has built-in reverse polarity protection, so when I deliberately hooked the clamps up backwards, the tester just started up normally. Neither the battery nor the device got damaged. That makes it safe to hand to someone who’s never used a tester before, which I found great for a beginner who’s never tested a battery before.
Which battery types and standards does it support?
It covers regular flooded, AGM flat plate, AGM spiral, GEL, and EFB batteries. On the standards side, it reads CCA, IEC, EN, DIN, CA, BCI, MCA, SAE, GB, and JIS. That’s about as wide as it gets for a handheld tester, so I rarely have to second-guess whether it’ll match a battery label.
Can it store test results for later?
It auto-stores up to 10 waveform monitoring records, which I can pull back up to compare readings over time. That’s handy for spotting a battery that’s slowly fading. Just know the cap is 10 — once you hit that, the oldest record gets bumped, so print or note anything important right away.
How big and heavy is it to carry around?
It weighs 3.3 pounds and measures 10 x 3.2 x 15 inches, so it’s not a pocket tool. I treat it as a bench or toolbox item rather than something I’d keep in the glovebox. If portability is your top priority, this isn’t the lightest option, but the size is a fair trade for the built-in printer and full test features.
My Final Verdict
After putting the OBDResource BM800 Car Battery Tester with Printer through real tests, I’m a fan. It covers 6V, 12V, and 24V systems, reads batteries from 100 to 2000CCA, and supports all 10 major standards plus flooded, AGM, GEL, and EFB types. The built-in printer and reverse polarity protection seal it for me. I’d recommend it to DIYers and small-shop techs who work on multiple vehicles — but not to someone who only wants a tiny glovebox tester.
The main knock is the size: 3.3 pounds and 10 x 3.2 x 15 inches isn’t pocket-friendly, and with only 14 reviews so far, the long-term track record is thin. Still, the printed reports and foolproof hookup make it worth a look if you want real diagnostic data.
Ready to Check the Price?
If you want a tester that covers every common battery type and hands you a printed report, this one is worth a closer look.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.