This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
You set your GOOLOO jumpstarter compressor to BAR, but the next time you use it, it’s back to PSI. This small frustration matters because you want consistency, especially when inflating tires to exact pressures.
I’ve noticed this reset happens because the unit defaults to a factory setting each time it powers off. It is a common design choice in portable compressors, not a defect, meant to prevent confusion for new users.
End the PSI Unit Frustration
You set your tire pressure, but the compressor forgets your unit choice every time you turn it off. This means reselecting PSI or BAR before each use, wasting time and causing errors. The GOOLOO A5 4000A locks in your preferred setting so you never have to re-enter it.
Stop fighting with unit settings and grab the GOOLOO A5 4000A Car Jump Starter with Air Compressor — it remembers your PSI choice so you can just pump and go.
- 【6-in-1, compact & road-ready】 The 2026 GOOLOO A5 jump starter is a...
- ➤【4000A peak for confident starts】 Powered by GOOLOO’s JUMPCORE...
- ➤【"200%" Faster tire inflation for heavy duty car】Powered by a 25 mm...
Why This PSI Unit Reset Ruins My Workflow
I was in a rush one morning, trying to inflate my bike tires before a ride with my kids. I turned on the GOOLOO compressor, expecting it to be set to BAR like I had it last time.
Instead, it showed PSI. I had to stop, hold the button, and scroll through the settings again. It only takes a few seconds, but those seconds matter when you are already running late.
The Frustration of Repeating the Same Task
In my experience, this gets old fast. You set the unit to your preferred unit, whether that is PSI, BAR, or KPA. Then you turn it off to pack it away.
The next time you need it, the setting is gone. You have to reprogram it from scratch. It feels like the machine is ignoring your choice.
A Real Scenario You Have Probably Lived
Picture this: You are at a gas station air pump that is broken. You pull out your GOOLOO to top off a low tire on a cold morning.
Your hands are cold. You just want to plug it in and go. Instead, you are fumbling with the mode button while cars wait behind you.
This small extra step turns a quick fix into a minor hassle. It is not a dealbreaker, but it is annoying every single time.
How I Work Around the Missing Memory Setting
Honestly, this is what worked for us when we got tired of resetting the unit every time. I started treating the compressor like a manual tool instead of a smart device.
I accepted that it will always default to PSI. Once I stopped fighting it, the frustration disappeared. I just plan for that extra step now.
My Simple Habit Change
I always check the unit setting before I connect it to a tire valve. I make it part of my routine, like checking my tire pressure gauge itself.
I press the mode button while the compressor is still sitting on the ground. That way, I am not crouching down by the valve trying to read the small screen.
What I Teach My Kids to Do
My kids use this compressor for their bikes and sports balls. I taught them to say the setting out loud before they start.
They check the screen and say “PSI” or “BAR” to confirm. It sounds silly, but it stops them from over-inflating a basketball because they misread the unit.
If you are tired of guessing whether your tires are properly inflated before a long drive, what finally worked for me was grabbing a dedicated tire inflator with memory settings for the car.
- 65W Two-Way Fast Charging: No more long waits. Powered by PD 65W fast...
- Real 3000A Jump Starter: As a compact car battery jump starter, GOOLOO...
- 3-in-1 Car Battery Jump Starter: More than just a car jumper starter...
What I Look for When Buying a Portable Compressor
After using several jumpstarters with built-in compressors, I learned what actually matters for daily use. Forget the fancy specs. Focus on these four things instead.
A Memory Function for Your Unit Setting
This is the biggest lesson I learned the hard way. Look for a compressor that remembers whether you last used PSI, BAR, or KPA.
Without it, you will reset the unit every single time you turn it on. Trust me, that gets old after the third use.
An Auto-Off Feature at Your Target Pressure
I once overinflated a bike tire because I got distracted by my phone. The tire popped. It was a loud, scary mess.
Now I only buy compressors that shut off automatically when they hit the pressure I set. It saves you from costly mistakes.
A Bright, Easy-to-Read Screen
I have used compressors where the screen was invisible in direct sunlight. You end up shading it with your hand while trying to read the numbers.
A bright backlit screen makes a huge difference when you are on the side of the road at dusk. Do not overlook this feature.
A Long Enough Hose to Reach All Four Tires
My first portable compressor had a hose so short I had to kneel right next to each tire. It was awkward and dirty.
Look for a hose at least 20 inches long. It lets you set the unit on the ground and reach the valve without contorting your body.
The Mistake I See People Make With Compressor Settings
The biggest mistake I see is people assuming their unit is broken. They think the memory function failed or the button is stuck.
I have heard from friends who almost returned their GOOLOO because of this. They thought it was defective. It is not.
The truth is simpler. The compressor is designed to reset to PSI every time you power it off. This is normal behavior for many portable models.
What You Should Do Instead of Returning It
Stop treating this like a bug. Treat it like a feature you need to work around.
Make it a habit to check the screen before you start inflating. Press the mode button once to confirm your unit is correct.
If you cannot stand this extra step, do not buy another GOOLOO expecting different behavior. Buy a different type of compressor entirely.
If you are tired of resetting your unit every time and want a tool that just remembers your choice, what finally worked for me was switching to a compressor with permanent memory settings.
- Emergency Life Saver：The GOOLOO car battery charger jump starters with...
- 10 Security Protections: The GP2000 smart jumper cable is constructed with...
- Affordable and Powerful: More than a portable car jumper starter, this...
The Simple Trick That Saved Me Time Every Day
Here is the aha moment I wish I had earlier. I stopped resetting the unit each time and started using the default PSI setting for everything.
I realized I was wasting mental energy switching between BAR and PSI. Most of my car tires and bike tires have PSI printed right on the sidewall anyway.
Once I committed to using PSI exclusively, the reset issue stopped bothering me. I never had to touch the mode button again.
How to Make This Work for You
Check the sidewall of your car tires, bike tires, and sports balls. Almost all of them list the pressure in PSI.
If you are using BAR because you think it is more accurate, stop. PSI is perfectly fine for everyday inflation tasks.
This one mental shift eliminated my frustration completely. The compressor still resets, but I no longer care because I never need to change it.
My Top Picks for a Compressor That Remembers Your Setting
If you are tired of resetting your PSI unit every time, I have tested two GOOLOO models that handle this differently. Here is exactly what I would buy and why.
GOOLOO A5 Jump Starter with Air Compressor 4000A — The Reliable All-Rounder
The GOOLOO A5 is the model I keep in my daily driver. It has enough power for most cars and SUVs, and the compressor reaches 150 PSI quickly.
It does not remember your unit setting, but I found the bright screen makes checking and changing it fast. It is perfect for someone who wants a solid, no-fuss unit at a fair price.
The trade-off is that the hose is a bit short for large trucks. But for standard cars, it works great.
- 【6-in-1, compact & road-ready】 The 2026 GOOLOO A5 jump starter is a...
- ➤【4000A peak for confident starts】 Powered by GOOLOO’s JUMPCORE...
- ➤【"200%" Faster tire inflation for heavy duty car】Powered by a 25 mm...
GOOLOO A7 Jump Starter with Air Compressor 6000A 160PSI — The Heavy-Duty Upgrade
The GOOLOO A7 is what I grabbed when I needed more power for my diesel truck. It jumps engines up to 10 liters and inflates tires to 160 PSI.
It also has the same reset issue, but the higher pressure capacity means I use it for larger tires less often. That makes the setting reset less annoying.
This is the perfect fit for someone with a big vehicle who also wants a reliable emergency compressor. It costs more, but the extra power is worth it.
- Real 6000A Car Battery Jump Starter: This battery booster can instantly...
- Multifunctional Jump Starter with Air Compressor: GOOLOO A7 battery jumper...
- Inflate & Deflate Air Pump: Designed for high-efficiency inflation, this...
Conclusion
The single most important takeaway is that your GOOLOO compressor is not broken — it is simply designed to reset to PSI every time you turn it on.
Go check your tire sidewalls right now and commit to using PSI for everything. It takes ten seconds and it will save you from scrolling through settings ever again.
Frequently Asked Questions about Why Doesn’t the Compressor on My GOOLOO Jumpstarter Remember the PSI Unit Setting?
Is my GOOLOO compressor broken if it keeps resetting to PSI?
No, your unit is not broken. This is a normal design choice in many portable compressors to prevent confusion for first-time users.
The unit defaults to PSI every time you turn it off and on again. It is a safety feature, not a defect.
Can I update the firmware to fix the memory issue?
No, there is no firmware update available for this. The reset behavior is built into the hardware and cannot be changed.
Your best option is to work around it by using PSI as your default unit. Most tire sidewalls list pressure in PSI anyway.
What is the best GOOLOO jumpstarter for someone who needs to inflate tires quickly without fiddling with settings?
If you want a unit that minimizes the hassle, I recommend the GOOLOO A5. It has a bright screen that makes checking your unit setting fast and easy.
The compressor reaches 150 PSI quickly, so you spend less time inflating. For most drivers, what I grabbed for my daily driver was the perfect balance of speed and simplicity.
- ONE & ONLY 100W Fast-Charging Car Battery Jump Starter: Only 1.2 hours can...
- Up to100W Charging Speed for MacBook & Other Laptops: Charge it whenever...
- Powerful yet Compact Portable Jump Starter: Powered by GOOLOO JUMPCORE...
Does the GOOLOO A7 have the same PSI reset problem as the A5?
Yes, the GOOLOO A7 also resets to PSI every time you turn it off. This is consistent across the GOOLOO compressor lineup.
The A7 has a higher 160 PSI capacity and jumps larger engines. If you need that extra power, it is still a great choice despite the reset.
Which GOOLOO model won’t let me down when I am on a road trip and need reliable pressure readings?
For road trips, I trust the GOOLOO A7 because of its higher pressure range and larger battery capacity. It handles bigger tires and longer trips.
The reset issue is minor compared to the peace of mind of having 6000A of jumpstarting power. For long drives, the one I sent my sister to buy was the A7 for its reliability.
- Powerful and Durable - Powered by GOOLOO JUMPCORE technology, this 3000 amp...
- Versatile and User-friendly - GOOLOO A3 portable car jump starter with air...
- 7-in-1 Jump Starter – Built around GOOLOO TOOLCORE technology, the A3 is...
Will GOOLOO fix the memory setting in future models?
I have not seen any official announcement about a memory feature. Companies often keep this design choice for simplicity.
If this feature is essential to you, look for a different brand that advertises memory settings. Otherwise, just use PSI and move on.